Cartridges

The experimental Colt Model 1910 pistol was developed by Colt as a possible replacement for the Colt Model 1903 Pocket Hammer Pistol and the project dates from around 1908 and continued to around 1913. The metric designation in all probability is an indication that it...

    The 9.65 x 23 Browning is dimensionally the same as the 9,8mm Colt cartridge and was chambered in the M1910 “Grand Browning” and, as can be seen from the photo below, it is similar to the Colt M1911. The first Grand Brownings were indeed chambered in 45...

The 9.4mm Dutch was adopted in 1873 for the M1873 Chamelot-Delvigne system revolver and with its adoption, the cartridge was named the Scherpe Patroon nr.11 (Ball Cartridge No. 11) and was packaged in boxes containing twelve rounds. It is interesting to note that the...

    By the late 1850’s Portugal had ceased to be a global power and by the early to mid-1860’s its influence consisted of mostly areas in Africa. It was during this period that most European Nations were modernising their armies, while Portugal had most of...

The 9x25 Dillon was designed in the 1980’s by Randy Shelly, an employee from Dillon Precision. It is a 10mm auto case necked down to 9mm so that he could get a 9mm cartridge to make major power factor for IPSC, which at that stage was set at 175. The large cases...

The 9 x 23 was launched at the 1996 NRA Annual Convention. It was just one of a number of 9mm variants that were launched during this period for IPSC shooters to make major power factor for competitions. The outward dimensions are the same as the 9mm Bergmann-Bayard...

This was another effort by shooters during the early 90’s in the quest for a 9mm handgun that could be used to compete in major caliber power factor for IPSC matches. It was made by Law Enforcement Specialties of Warminster, PA., with cases in all probability by...

Owning military caliber handguns is prohibited in many countries, like Italy. In the early 80’s, the 9mm Ultra gained a limited following there for competitive shooters, but the cartridge was far from ideal for IPSC matches, being underpowered even for minor power...

The Gyurza (venomous snake) was a Russian development by designer Petr Serdyukov during the early-90’s, with the idea to find a replacement for the 9mm Makarov. The Gyurza however lost out to the PY or Pistolet Yarygina which was designed by Vladimir Yarygin at the...

This was a Winchester design dating from the late 1970’s to try and duplicate 357 Magnum ballistics in a semi-auto handgun. It was originally made for the Wildeypistol and later the AMT (Arcadia Machine and Tool) Automag 3. The guns were much too bulky for self...

The earliest reference to the walking stick design capable of firing a projectile dates from 1580 and is currently in the Wallace Collection in London and incorporates a wheel lock pistol and a sword blade. The design is actually very simple and was manufactured by a...

The 9mm Ultra was developed by the German firms of Lothar Walther and Gustaf Genshow (GECO) in 1936 in order to interest the Luftwaffe in a pistol that was more powerful than the 9mm Kurtz but more compact than the P38 but the idea never went any further. Shown below...

Cattle killing cartridge developed in the Czech Republic                 

    The 9mm Super Comp dates from around June 1997, the same time as the 38 Super Comp and is basically nothing more than a 9x23 with strengthened base. Cases are by Starline. The intent of the cartridge was to give IPSC shooters a 9mm cartridge that could...

This cartridge is also known as the 9x25 SAG, or Super Auto G and is based on the 10mm Auto case necked to 9mm and was developed by Horst Grillmayer from Austria. The cartridge is very similar to the 9mm Major, also a Horst Grillmayer development. Some of the original...

The latter part of the 19th Century saw the revolver as the standard military side-arm in Europe and elsewhere. With giant strides made in weapons technology during those years, various military powers put a lot of resources into equipping their armies with the latest...

This was part of the Swiss revolver trials from 1871 – 1881 with cartridges loaded by the Swiss factory at Thun, as well as the firm of J. Stahel of Zurich and can be found in a number of different case lengths. It did not survive as the 7,5mm Swiss M1882 was selcted....

This was one of the calibers used in revolvers made by Belgian gunsmith Albert Spirlet who had his shop at Quai de Boverie, 5 in Liège in Belgium around 1894. The revolver used an ingenious design where the barrel tipped upwards instead of downwards, although the 1870...

The squeeze bore, multiple projectile cartridge system concept was developed by Russel Robinson in 1961 although the patent was only granted in 1969. This was called the Salvo Squeeze Bore system and was different from Project Salvo, which was run by the US Army. The...